AUDIO DSP MODULES

AGDE-E20

AGDE-G60

Premium Audio DSP solution for mic/guitar/bass amplifiers, multi-effectors, console/powered mixers
AGDE-E20 AGDE-G60
  • Cost-effective Premium DSP Module
  • powerful Premium DSP Module
  • 3x powerful than AGDE-E20 and lots more RAM, even as Dual-Channel FX

[Specifications]

* Analog audio input and output : 2-in 2-out
  • Internal AD/DA converter : 24-bit / 48kHz, up to 96kHz (External AD/DA can be used)
  • Fully differential I/O (or Single-ended input and Fully differential output)
  • Nominal level : 1.414Vrms=4Vpk-pk (Fully differential I/O) / 0.707Vrms=2Vpk-pk (Single-ended input)
  • Frequency response : 20Hz ~ 20kHz, ±0.5dB
  • S/N ratio : >90dB
* Digital capabilities
AGDE-E20 AGDE-G60
  • up to 200 MMACS @ 100MHz
  • up to 600 MMACS @ 300MHz
  • DSP arithmetic: 32-bit
  • 5V single-power input, 3.3V / 1.8V power outputs for analog/digital peripherals
  • 24 general-purpose I/O with pull-up (up to 7 channels of 10-bit A-D converting input)
  • 1 set of  UART Rx and Tx
* Power consumption
AGDE-E20 AGDE-G60
  • 45mA @ 5V
  • 170mA @ 5V
  • Operating temperature : -25 to +75℃
  • Dimensions : 60mm x 50mm
  • Connections: Single-line 22-pin header, 2.54mm-pitch, down-sided (optional 22-pin available)

[Downloads]

AGDE-E20 AGDE-G60

APPLICATION BOARDS

AGAB-GL128

AGAB-GL128OLED

128x64 Graphic LCD/OLED-display FX board for console mixers with flexible editing functions
AGAB-GL128 AGAB-GL128OLED
* DSP Module Compatibility
AGDE-E20 AGDE-G60
○
compatible 		◎
compatible & recommended.
* Sounds : 100 presets, typical Presets
* Displays
AGAB-GL128 AGAB-GL128OLED
  • 2.9“ (128x64) Monochrome Graphic LCD
  • 1x LED (for tap time)
  • 2.4“ (128x64) Monochrome Graphic OLED
  • 1x LED (for tap time)
* Controllers
  • 1x Rotary encoder with push-switch
  • 5x Push-button switches
* Connectors
  • 1x 2-pin connector, 2.54mm-pitch, for digital power input (5V)
  • 1x 3-pin connector, 2.54mm-pitch, for analog power inputs (±9V~15V, typical)
  • 2x 3-pin connectors, 2.54mm-pitch, for analog inputs/outputs (stereo)
* Dimensions / Mountings
AGAB-GL128 AGAB-GL128OLED
  • 110mm x 65mm
  • 4x thru-holes (Φ3.2mm)
  • Layout
  • 105.4mm x 60mm
  • 4x thru-holes (Φ3.2mm)
  • Layout

AGAB-P100

AGAB-P100X

2-FND preset-based FX board for console/powered mixers
AGAB-P100 AGAB-P100X
* DSP Module Compatibility
AGDE-E20 AGDE-G60
◎
compatible & recommended.		 ○
compatible
* Sounds : 100 presets, typical Presets
* Displays
AGAB-P100 AGAB-P100X
  • 2x 7-segment displays
  • 2x 7-segment displays
  • 1x LED (for tap time)
* Controllers
AGAB-P100 AGAB-P100X
  • Option 1 : 1x Rotary encoder w/push-switch
  • Option 2 : 3x Push-button switches
  • 1x Rotary encoder w/push-switch
  • 4x Push-button switches
* Connectors
  • 1x 2-pin connector, 2.54mm-pitch, for digital power input (5V)
  • 1x 3-pin connector, 2.54mm-pitch, for analog power inputs (±9V~15V, typical)
  • 2x 3-pin connectors, 2.54mm-pitch, for analog inputs/outputs (stereo)
* Dimensions / Mountings
AGAB-P100 AGAB-P100X
  • 50mm x 60mm
  • 2x thru-holes (Φ3.5mm)
  • Layout
  • 70mm x 60mm
  • 4x thru-holes (Φ3.2mm)
  • Layout

AGAB-GAH1

All-in-one solution demo board for guitar/bass amplifiers
* DSP Module Compatibility
AGDE-E20 AGDE-G60
○
compatible 		◎
compatible & recommended.
* Sounds : Tuner + Modeling(Distortion) + Modulation(Chorus/Flanger/Phaser/Tremolo) + Echo + Reverb
* Displays
  • 1x FND + 3x LEDs (for tuner)
  • 8x LEDs (for modeling)
  • 1x LED (for tap time)
* Controllers
  • 1x Push-lock switch (for power on/off)
  • 1x Rotary potentiometer (for master volume)
  • 1x Rotary encoder
  • 5x Rotary potentiometers
  • 1x Tact switch (for tuner)
  • 5x Tact switches (for store/recall)
  • 3x Tact switches (for extended functions)
  • 1x Tact switch (for tap time)
* Connectors
  • 1x Φ9mm DC jack (for +12V power input)
  • 3x Φ6.35mm Phone jacks (for guitar input, audio output, and external control pedal switch)
  • 1x Φ3.5mm Phone jack (for auxiliary audio inputs – stereo mix)
* Dimensions / Mountings
  • 210mm x 90mm
  • Tightened with nuts of rotary encoder, potentiometer, and phone jacks
  • Layout

AGAB-MX4

AGAB-MX6

Easy-applicable FX board with instant sound adjustment for instrument amplifies and powered mixers
AGAB-MX4 AGAB-MX6
* DSP Module Compatibility
AGDE-E20 AGDE-G60
◎
compatible & recommended.		 ○
compatible
* Sounds : Chorus + Echo / Echo + Reverb / Chorus + Reverb (typical)
* Displays
AGAB-MX4 AGAB-MX6
  • 8x LEDs + 1x LED
  • 1x LED
* Controllers
AGAB-MX4 AGAB-MX6
  • 4x Rotary potentiometers
  • 1x Push-button switch
  • 6x Rotary potentiometers
  • 2x Push-lock switches
* Connectors
  • 2x5-pin header socket
* Dimensions / Mountings
AGAB-MX4 AGAB-MX6
  • 165mm x 64.3mm
  • Tightened with nuts of potentiometers
  • Layout
  • 180mm x 65mm
  • Tightened with nuts of potentiometers
  • Layout

AGAB-SPK12

Speaker processing board with RJ45 connectors
* DSP Module Compatibility
AGDE-E20 AGDE-G60
○ (mini)
* Sounds : Delay + EQ + Crossover + Limiter
* Displays : none
* Controllers : none
* Connectors
  • 2x RJ45 connectors
  • 1x 9-pin header
* Dimensions / Mountings
  • 50mm x 65mm
  • 2x Thru-holes (Φ3.5mm)
  • Layout